Reefer
Reefer loads
An insulated trailer with its own refrigeration unit, built to hold one temperature from the shipper's dock to the receiver's.
What ships in a reefer
- Fresh and frozen food
- Produce and dairy
- Pharmaceuticals and medical supplies
- Flowers and plants
- Freight that must not freeze in winter
A reefer is a dry van with insulated walls and a refrigeration unit mounted on the front. The unit holds the setpoint on the load, and the insulation is why the inside is a little shorter and the payload a little lighter than a plain van.
The unit has two run modes. Continuous mode keeps the air moving and holding the temperature the whole trip, which is what produce and anything that has to stay precisely cold needs. Cycle mode shuts the unit down when it reaches the setpoint and restarts it when it drifts, which saves fuel on freight that tolerates some swing.
Reefer loads usually come with a required temperature and a pre-cool instruction. Check both before you accept the load, because a receiver can reject freight that arrived outside its range.
Specifications
- Length
- 48 or 53 ft
- Inside height
- ~8 ft 6 in
- Capacity
- ~42,000 lb
- Pallet spots
- Up to 26
- Temperature
- Roughly -20 to 70°F
- Power
- Usually a diesel unit
Figures are standard federal and industry dimensions. State limits vary, so check the route before you assume a load is legal.
Common questions
Reefer, explained
What temperature range can a reefer hold?
Most units hold a setpoint from roughly -20°F up to about 70°F, depending on the unit and the outside conditions. The load post names the temperature the shipper requires.
What does pre-cooling a reefer mean?
Running the unit with the doors closed before loading so the trailer starts at the setpoint. Loading warm freight into a warm trailer forces the unit to catch up while the freight is already inside, so shippers often ask for it.
Search the board for your next load.
Free to create an account and browse the board. A membership gets you the contact details and the alert that puts you on the load first.