|
Feb 20, 2026 at 03:57 PM CST
+ 3
|
|
|---|---|
|
Posted by a private FlatLoads.com member.
|
Posted by a private FlatLoads.com member.
Hello, This is Sowmya with Pushpak Logistiks LLC(MC# 994132) We need assistance with offloading a bulk liquid tanker (Non-haz), at Colfax, NC plant-National Pipe& Plastics, 9609 west market street, Colfax, NC 27235. The air compresor on the truck broke down, and we need the equipment (PU with compressor) to get him offloaded asap today. Please call (703)582-2551 or (330)207-6729.
|
|
Replied on Tue, Feb 24, 2026 at 01:50 PM CST
+ 1
|
|
|---|---|
|
Posted by a private FlatLoads.com member.
|
Posted by a private FlatLoads.com member.
Use the truck air as backup, set up and gland hand with a ball valve to keep 65 psi against the tractor protection valve. itll be slow, but thats better then not being able to finish the load. all my trucks are equipped with this type of setup, just incase the compressor fails out west. |
|
Replied on Wed, Feb 25, 2026 at 01:21 PM CST
+ 1
|
|
|---|---|
|
Posted by a private FlatLoads.com member.
|
Posted by a private FlatLoads.com member.
Quote: "Use the truck air as backup, set up and gland hand with a ball valve to keep 65 psi against the tractor protection valve. itll be slow, but thats better then not being able to finish the load. all my trucks are equipped with this type of setup, just incase the compressor fails out west. "
Hello Brian, Thanks for the tip. The driver figured it out a little later and did the same. Got offloaded the same day! |
|
Replied on Fri, Mar 06, 2026 at 10:32 AM CST
+ 1
|
|
|---|---|
|
Posted by a private FlatLoads.com member.
|
Posted by a private FlatLoads.com member.
Hello. I have been involved in drybulk tanker work for over 15 years as region manager and familiar with resins. Perhaps, I could be of some assistance to you. Please look me up on LinkedIn. Happy to help! Einar Markussen STC Americas LLC cell: 6103904002
|
